[1] Weidong Liu, Ao Cheng, Haoyang Dong, et al. Electrochemical jet machining in deep-small holes with gas assistance: Generating complex features on internal surfaces, Journal of Materials Processing Tech. 335 (2025) 118662.

[2] Weidong L ,Wentao L ,Zhiyong G, et al. A novel approach for predicting the complex geometry generated by electrochemical jet machining[J].The International Journal of Advanced Manufacturing Technology, 2024, 130(11-12):5369-5378.

[3] Weidong Liu, Yan Luo, Yonghua Zhao, et al. Electrochemical Jet Machining of Surface Texture: Improving the Strength of Hot-Pressure- Welded AA6061-CF/ PA66 Joints, J. Compos. Sci. 8 (2024) 263.

[4] Weidong Liu, Shun Li, Quan Zhang, et al. Anodic Dissolution Behavior of DD6 Nickel-Based Single Crystal Superalloy for Electrochemical Machining Applications, Journal of The Electrochemical Society 171 (2024) 113505.

[5] Weidong Liu, Wentao Li, Yonghua Zhao, et al. Gap effect in electrochemical jet machining, Journal of Manufacturing Processes 99 (2023) 652–662.

[6] Weidong Liu, Shun Li, Yonghua Zhao, et al. Developing a New Flow Cell for Electrochemical Machining Anodic Dissolution Investigations by Simulation- Based Design and 3D Printing, Journal of The Electrochemical Society 170 (2023) 091504.

[7] Weidong Liu, Sansan Ao, Yang Li, et al. The effect of anodic behavior on ECM of TB6 titanium alloy. Electrochimica Acta 233 (2017) 190–200.

[8] Weidong Liu, Masanori Kunieda, Zhen Luo. Three-dimensional simulation and experimental investigation of electrolyte jet machining with the inclined nozzle. Journal of Materials Processing Technology 297 (2021) 117244.

[9] Weidong Liu, Zhen Luo, Masanori Kunieda. Electrolyte jet machining of Ti1023 titanium alloy using NaCl ethylene glycol-based electrolyte. Journal of Materials Processing Technology 283 (2020) 116731.

[10] Weidong Liu, Sansan Ao, Yang Li, et al. Elimination of the over cut from a repaired turbine blade tip post-machined by electrochemical machining. Journal of Materials Processing Technology 231 (2016) 27–37.

[11] Weidong Liu, Hui Zhang, Zhen Luo, et al. Electrochemical micromachining on titanium using the NaCl-containing ethylene glycol electrolyte. Journal of Materials Processing Technology 255 (2018) 784-794

[12] Taotao Cheng, Zhiping Wang, Shijie Dai, et al. Fabrication of ceramic sealing coatings for shell bionic structures and their failure mechanism during thermal cycling[J]. Ceramics International, 2023, 49(06): 8962-8975.

[13] Taotao Cheng, Yuelu Dong, Liang Ma, et al. Experiment and numerical simulation on thermal cycling performance of YSZ-based sealing coatings with "brick-mud" layered structure [J]. Coatings, 2024, 14(3): 14030351.

[14] Taotao Cheng, Zhiping Wang, Shijie Dai, et al. Effect of SiC whiskers on thermal cycling performance of YSZ-Based sealing coating[J]. Ceramics International, 2022, 48(05): 6443-6452.

[15] Cheng Taotao, Wang Zhiping, Dai Shijie, et al. Influence of SiC whiskers on the micro-structure of APS YSZ coating, Rare Metal Materials and Engineering, 2021, 50(08): 2700-2707.

[16] Zhi-Yong Han, Wen-Xin Shi, Zhe Wang, et al. Oxidation Behavior of Thermally Grown Oxide on Aluminized Coating Irradiated  by High- Current Pulsed Electron Beam[J]. Metallography, Microstructure, and Analysis, 8(5)：726-734, 2019.

[17] Yankuan Liu , Yinghui Liu, Philippe Lours, et al. Influence of isothermal aging conditions on APS TBC's interfacial fracture toughness [J]. Surface & Coatings Technology, 313 (2017) 417-424.

[18] Yankuan Liu , Etienne Copin, Sandrine Duluard, et al. Apparent Interfacial Toughness of Undoped and Photoluminescent Eu3+-Doped Yttria-Stabilized Zirconia Thermal Barrier Coatings [J]. Journal of Thermal Spray Technology, (2020) 29: 433-443.

[19] Yankuan Liu, Xuelin Zhou, Zhiping Wang. Effect of isothermal heat treatment on crystallinity, tensile strength and failure mode of CF/PPS laminate [J]. High Performance Polymers, 2021, 33(5): 497-508.

[20] Yankuan Liu, Yujie Fei, Zhiping Wang, et al. Evaluation of mechanical properties of YSZ TBCs doped by different ratios of Eu3+ ions after isothermal oxidation [J]. Ceramics International, 48 (2022) 18257-18269.

[21] Yankuan Liu, Sinan Yang, Zhiping Wang. Effect of WC-17Co Powder Density on Coating Mechanical Properties and Residual Stress [J]. Rare Metal Materials and Engineering, 2022, 51(4): 1188-1194.

[22] Yankuan Liu, Akinola Ajayi, Etienne Copin, Xinlin Li, Ze Liu, Philippe Lours, Zhiping Wang,Photoluminescence evolution in APS-deposited YSZ:Eu3+ thermal barrier coatings: mechanisms and sensitivity to thermal history over 0–800 h isothermal exposure at 1100 °C,Ceramics International,Volume 51, Issue 20, Part A,2025,Pages 30618-30631,ISSN 0272-8842

[23] Wang, L., Zhan, J., Liu, Y. et al. Research on crack propagation behaviour of EB-PVD TBCs based on TGO evolution. Sci Rep 13, 17550 (2023).

[24] Sun YB, Wang ZP. The effect of melting point depressant elements B, Si, and P in Ni-based brazing filler metals on the formation of brazed joints [J]. Weld. World, 2023, 67:1299-1312.

[25] Li Na, Sun Lingfeng, Chen Dong. An experimental study on the low velocity impact response of repaired carbon fibre/ Benzoxazine composites [J]. fibers and polymers, 2019, 20(1), 129-137.

[26] Liang Ma, Jun Wang, Guichang Zhang. The Dynamic Characteristic of a Faulted Rotor System with Multi-Objective Optimization Designed SFD, Applied Sciences-Basel, 2019, 9(17).

[27] Liang M ,Jun W ,Chenghao L .Nonlinear Dynamic Behavior Effect of Magnetorheological Damper on a Rotor System with Axial and Radial Rub-Impacts[J].SAE International Journal of Aerospace,2021,15(1):

[28] Jun Wang, Junhong Zhang, Liang Ma. Study on the Effect Mechanism of MRD to Rotor System, Applied Sciences-Basel, 2019, 9(11).

[29] Junhong Zhang, Xin Lu, Jiewei Lin, et al. Dynamic analysis of a rotor-bearing-SFD system with the bearing inner race defect, Shock and Vibration, 2017, 2017( 2489376).

[30] Pei Xiangzhong, Ding Kunying. Calculation of high-speed abrasion forces for ceramic coatings based on the Hertzian contact model. China Welding.2024, 33(01).

[31] Wang Z, Wang Z, Ding K, et al. Failure analysis and reliability assessment of a type of aero-engine combustion chamber thermal barrier coatings[J]. Case Studies in Thermal Engineering, 2024, 53: 103886.

[32] Ding K, Yang Y, Wang Z, et al. Relationship between local strain energy density and fatigue life of riveted Al-Li alloy plate[J]. Theoretical and Applied Fracture Mechanics, 2023, 125: 103672.

[33] Ding K, Zhang T, Wang Z, et al. Effect of Thermal Growth Oxide Composition and Morphology on Local Stresses in Thermal Barrier Coatings[J]. Materials, 2022, 15(23): 8442.

[34] Wang L, Li Z,Ding K, et al. Effects of TGO growth on the stress distribution and evolution of three-dimensional cylindrical thermal barrier coatings based on finite element simulations[J]. Ceramics International, 2022, 48(6): 7864–7875.

[35] Kunying D, Taotao C, Zhiyong H. Formation and Properties of Porous ZrO2-8wt%Y2O3 Coatings[J]. Rare Metal Materials and Engineering, 2018, 47(6): 1677-1681.

[36] Yang J ,Zilong Z ,Tianzhi Y .Dynamics of nonlinear energy sink with a polynomial damped frequency converter[J].International Journal of Non-Linear Mechanics,2024,158

[37] Y. Jin, Z. Meng, Q. Hu and D. Chen, "Heterogeneous Dynamic-Aware GNN for RUL Prediction of Aeroengine," in IEEE Transactions on Instrumentation and Measurement, vol. 74, pp. 1-14, 2025, Art no. 3538014

[38] JinY ,Liu L ,Duan Z , et al.Non-smooth nonlocal mechanical diode[J].International Journal of Non-Linear Mechanics,2024,164104773-.

[39] JIN Y ,YANG T .Enhanced vibration suppression and energy harvesting in fluid-conveying pipes[J].Applied Mathematics and Mechanics(English Edition),2023,44(09):1487-1496.

[40] Zhang C,Li X,Liu X,et al.Repair limit policy of aircraft component based on extended uncertain random renewal reward process[J].Engineering Computations,2022,39(6):2033-2052.

[41] 丁坤英, 杨翼飞, 张涛, 等. 铝锂合金压铆壁板残余应力与疲劳性能分析[J]. 稀有金属材料与工程, 2024, 53(02):474-482.

[42] 丁坤英, 裴祥忠, 刘子剑,等. 基于赫兹接触模型的发动机封严涂层碰磨力计算与优化[J].表面技术, 2024, 53(05):184-193.

[43] 丁坤英, 杨翼飞, 王者. 铝锂合金自动铆接干涉量及残余应力分析[J]. 稀有金属材料与工程, 2023, 52(05):1717-1724.

[44] 丁坤英, 李志远, 王璐璐, 等. 大气等离子喷涂YSZ涂层中CMAS渗透行为分析[J]. 表面技术, 2022, 51(10): 370–379.

[45] 丁坤英, 李志远, 王者, 等. 基于分形方法的YSZ热障涂层有效热导率分析[J]. 中国表面工程, 2020, 33(3): 104–110.

[46] 王林, 丁坤英, 林小娉, 等. 8YSZ双层热障涂层缺陷演变与微裂纹水浸超声宏观检测[J]. 无机材料学报, 2019, 34(12): 1265–1271.

[47] 丁坤英, 于建海. 含有闭孔的镍基合金涂层压缩过程中的力学性能[J]. 稀有金属材料与工程, 2018, 47(1):219-222.

[48] 王梦潇,丁坤英,王者,等.Yb2Si2O7环境障涂层高温CMAS的侵蚀行为分析[J].中国陶瓷,2024,60(12):41-50.

[49] 丁坤英,刘子剑,王梦潇,等.水氧腐蚀对Yb2Si2O7涂层裂纹扩展的影响[J].硅酸盐学报,2024,52(09):2981-2994.

[50] 丁坤英,贾治豪,孔祥芬,等.双硅酸盐高熵材料热稳定性研究[J].稀有金属材料与工程,2024,53(10):2968-2974.

[51] 程涛涛, 王志平, 戴士杰,等. 航空发动机陶瓷高温封严涂层研究进展[J]. 机械工程学报, 2021, 57(10): 126-136+147.

[52] 程涛涛, 王志平, 戴士杰, 等. 黏结相对YSZ基高温封严涂层沉积效率和热循环性能的影响[J].中国表面工程, 2021, 34(6): 102-113.

[53] 程涛涛.非块体材料金相教学探讨[J].实验科学与技术, 2023, 21(01): 103-108.

[54] 程涛涛, 丁坤英, 王志平. 热/机械力循环作用下铝硅聚苯酯涂层性能研究[J]. 热加工工艺, 2018, 47(16): 151-154+159.

[55] 程涛涛, 丁坤英, 纪朝辉, 等.热老化对铝硅聚苯酯涂层抗砂粒冲蚀性能的影响[J].材料热处理学报, 2017, 38(09): 148-154.

[56] 程涛涛, 黄宇翠, 纪朝辉. 不同硬度铝硅聚苯酯涂层的刮磨机理[J]. 材料保护, 2016, 49(09): 8-10+42+6.

[57] 马梁,董跃路,赵鹏,等.进出口几何设计对自激扫掠喷嘴工作特性影响研究[J].推进技术,2025,46(07):136-148.

[58] 贾鹏,薛纪远,刘昱乾,等.Inconel 713LC铸造高温合金微束等离子弧焊接裂纹形成机理及抑制[J].焊接学报,2024,45(06):39-45.

[59] 程涛涛, 孙波, 江云飞, 等. 不同造孔剂含量的铝硅聚苯酯粉末制备涂层性能研究[J]. 焊接技术, 2014, 43(06): 23-26.

[60] 程涛涛,吴治兵,蒋家有于,等.“砖-泥”结构陶瓷封严涂层横向裂纹扩展抑制机理[J].表面技术,2025,54(07):212-224.

[61] 李娜, 路鹏程, 才华, 等. 蜂窝夹层复合材料修补结构低速抗冲击性能[J].航空材料学报，2022, 42（5）：109-118.

[62] 韩志勇, 史文新, 王者, 等. HCPEB表面改性对镀铝CoCrAlY涂层显微组织及氧化性能的影响[J]. 材料导报，2019,33（7）：2392-2396.

[63] 韩志勇,马斯景,路鹏程.铝合金与复合材料连接表面处理方法的研究进展[J].中国塑料,2024,38(01):124-133.

[64] 韩志勇, 丘珍珍, 史文新, 等. CoCrAlY表面改性后热障涂层高温氧化及热震性能[J]. 焊接学报，2018, 40（6）：19-22. 

[65] 韩志勇, 丘珍珍, 史文新. 强流脉冲电子束粘结层表面改性对热障涂层热震及残余应力的影响[J]. 材料导报, 2018, 32（12）：4303-4308.

[66] 韩志勇,赖浩瀚,张权,等.热障涂层抗CMAS腐蚀的表面改性研究进展[J].表面技术,2024,53(16):35-50.

[67] 韩志勇, 史文新, 丘珍珍. 强流脉冲电子束轰击粘结层表面微观形貌的研究[J]. 河北师范大学学报，2018, 42（1）：47-51. 

[68] 韩志勇,王仕成,程涛涛,等.粘接相对YSZ基高温封严涂层沉积效率的影响（英文）[J].稀有金属材料与工程,2022,51(06):1933-1941.

[69] 韩志勇,张涛,郭万森,等.服役环境对涡轮导向叶片热障涂层失效模式的影响[J].表面技术,2023,52(04):261-271.

[70] 韩志勇， 韩剑, 丘珍珍.  HCPEB作用下镀铝CoCrCrY涂层的高温氧化行为[J]. 焊接学报，2018, 39（2）：80-83.

[71] 王志平, 曹雨函, 程涛涛, 等.等离子喷涂钙镁铝硅酸盐陶瓷涂层制备及性能研究[J]. 硅酸盐学报, 2023, 51(11): 2780-2791.

[72] 苏景新, 费骏, 刘昱乾, 等. TC4钛合金薄板等离子弧开槽堆焊工艺探究[J]. 焊接技术, 2020, 49(02):31-37+5-6.

[73] 苏景新, 张艺莹, 吴欣欣, 等.化学转化工艺对TC4钛合金表面性能及电偶腐蚀性能的影响[J].功能材料,2018,49(12):12170-12174.

[74] 王志平, 靳朋礼, 杨斯楠, 等. 镀锌层厚度对铝/镀锌板CMT搭接接头组织和性能的影响[J]. 焊接学报, 2019, 40(4):16-21.

[75] 王志平，顾子琛.静电粉末流化法碳纤维/聚苯硫醚预浸料的制备及性能表征[J].塑料工业，2019, 10(47): 22-26.

[76] 王志平,战金滢,刘延宽,等.热障涂层演变、失效理论及模型建立研究进展[J].表面技术,2023,52(09):39-62.

[77] 王者,王志平,丁坤英,等.某型航空发动机涡轮导向叶片热障涂层可靠性分析[J].航空学报,2024,45(22):286-300.

[78] 刘延宽, 王源生, 王璐璐. 有限元方法在热障涂层研究领域中的发展与应用[J]. 航空动力学报, 2024, 39(10): 20220762.

[79] 刘延宽, 李鑫林, 王志平. 稀土掺杂热障涂层体系及其荧光效应研究现状与发展趋势[J]. 表面技术, 2024, 53(14): 15-31.

[80] 刘延宽, 袁航, 李顶河, 等. 热老化对热障涂层界面力学性能影响及数值计算研究[J]. 航空学报, 2023, 44(20): 428507.

[81] 刘延宽, 顾子琛, 王志平. 连续纤维增强热塑性预浸料制备工艺与发展趋势[J]. 中国塑料, 2022, 36(2):172-181.

[82] 刘延宽, 许婧, 李尧, 等. Eu3+掺杂对YSZ热障涂层隔热性能与涂层界面断裂韧性的影响研究[J]. 稀有金属材料与工程, 2021, 50(5):1699-1705.

[83] 刘延宽, 杨丽萍, 王志平. 恒温氧化处理对YSZ:Eu热障涂层发光性能及微观结构的影响[J]. 金属热处理, 2020, 45(5):12-16.

[84] 刘延宽, 苏景新, 张春晓. 国内在役宽体客机腐蚀损伤情况调查与分析[J]. 电镀与涂饰, 2020, 39(3):158-164.

[85] 刘延宽,李鑫林,刘泽,等.具有Eu3+掺杂亚层的热障涂层荧光效应及机理研究[J/OL].中国稀土学报,1-17[2025-09-19].

[86] 王璐璐,刘延宽,王志平,等.热障涂层在飞机APU中的应用、失效形式与维护方法[J].表面技术,2022,51(06):170-179+203.

[87] 王璐璐,刘延宽,费宇杰,等.飞机APU涡轮导向叶片高温防护涂层失效模式分析（英文）[J].稀有金属材料与工程,2023,52(02):470-477.

[88] 路鹏程, 李志歆, 王志平, 等. CF/PPS复合材料层板电阻焊接研究[J].塑料工业, 2021, 49(01):60-64+88.

[89] 路鹏程,卞文熙,安俊龙,等.电热作用对碳纤维增强树脂基复合材料层板冲击性能的影响[J].高分子材料科学与工程,2023,39(06):85-91+98.

[90] 路鹏程,王志平.复合材料双真空成型装置的设计与实现[J].实验科学与技术,2024,22(04):113-119.

[91] 路鹏程, 李志歆, 邱运朋, 等. 湿热环境对碳纤维增强聚苯硫醚层合板感应焊接接头性能的影响[J]. 复合材料学报, 2021, 38(09): 2807-2813.

[92] 罗宝舟, 路鹏程, 林立钦, 等. CFRP层板电-热耦合特性研究[J].塑料工业, 2020, 48(10): 122-127.

[93] 路鹏程,祖浩轩,安俊龙,等.聚氨酯弹性体在不同环境条件下的老化性能[J].复合材料学报,2025,42(05):2557-2566.

[94] 路鹏程, 陈栋, 王志平. 碳纤维/聚苯硫醚热塑性复合材料电阻焊接工艺[J]. 复合材料学报, 2020, 37(05): 1041-1048.

[95] 路鹏程, 陈栋. CFRP层板电热作用下温度场及内应力变化[J].工程塑料应用, 2019, 47(05): 115-121.

[96] 路鹏程, 孙凌丰, 王宏洋, 等. 湿热和电热作用对复合材料力学性能的影响[J]. 高分子材料科学与工程, 2018, 34(07): 90-94+99.

[97] 孙宇博, 马锦晖. 电解加工去除焊层多场耦合仿真及试验研究[J]. 表面技术, 2021, 50(06):347-355.

[98] 孙宇博, 靳朋礼, 马锦晖, 等. 热处理对哈氏合金X焊接接头组织与性能的影响[J]. 稀有金属材料与工程, 2019, 48(09):3029-3034.

[99] 孙宇博, 周可人, 马锦晖, 等. 工艺参数对TC4钛合金电解加工速率及加工质量的影响[J]. 表面技术, 2018, 47(12):307-313.