中高速条件下不同翼尖小翼的数值模拟分析

中国民航大学学报 ›› 2021, Vol. 39 ›› Issue (4): 8-12.

中高速条件下不同翼尖小翼的数值模拟分析

王辉，陈泽洲

（中国民航大学航空工程学院，天津 300300）

收稿日期:2021-04-10 修回日期:2021-04-10 接受日期:2021-01-15 出版日期:2021-08-25 发布日期:2021-12-03
作者简介:王辉（1966—），男，辽宁本溪人，教授，博士，研究方向为飞行仿真技术和智能算法与控制.
基金资助:
国家自然科学基金项目（U1733128）

Numerical simulation analysis of different winglets under medium-high speed conditions

WANG Hui, CHEN Zezhou

（College of Aeronautical Engineering, CAUC, Tianjin 300300, China）

Received:2021-04-10 Revised:2021-04-10 Accepted:2021-01-15 Online:2021-08-25 Published:2021-12-03

摘要/Abstract

摘要： 为研究不同翼尖小翼的减阻特性，选取 4 种翼尖小翼和翼尖延伸作为研究对象，在相同展长翼尖与中高速飞行条件下（Ma = 0.6），利用 k-ω 剪切应力运输（SST，shear stress transfer）两方程模型对 5 种不同翼尖装置进行数值模拟。研究 5 种翼尖装置情况下机翼表面的压力特征和翼尖流场，对比分析了不同翼尖的减阻特性，并对诱导阻力变化原理进行了分析。研究结果表明：不同翼尖小翼气流引导方向不同，改变了机翼表面流场，影响了翼尖压力分布；在中高速条件下，相同展长的融合式和斜削式翼尖小翼相比翼尖延伸减阻效果明显，双羽式翼尖小翼能有效分散翼尖涡。

关键词: 翼尖小翼, k-ω 剪切力运输（SST, shear stress transfer）两方程模型, 减阻, 升阻比, 流场

Abstract: In order to study the drag reduction characteristics of different winglets, four types of winglets and winglet extensions are selected as the research objects. Under the same extended winglet and medium-high speed flight conditions (Ma = 0.6), five different winglet devices are numerically simulated using the k-ω SST (shear stress transfer) two-equation model. The pressure characteristics of the wing surface and the winglet flow field of five types of winglet are studied. The drag reduction characteristics of different winglet are compared and analyzed, along with the principle of induced drag changes. Research results show that the airflow guidance direction of different winglets the surface flow field of the wing and affects the winglet pressure distribution; under the conditions of medium-high speeds and with same wing length, the fused and raked winglets have better drag reduction effect, and the double-feathered winglet can effectively disperse the winglet vortex.

Key words: winglets, k-ω SST two-equation model, drag reduction, lift-to-drag ratio, flow field

中图分类号:

V224.4

王辉, 陈泽洲. 中高速条件下不同翼尖小翼的数值模拟分析 [J]. 中国民航大学学报, 2021, 39(4): 8-12.

WANG Hui, CHEN Zezhou. Numerical simulation analysis of different winglets under medium-high speed conditions[J]. Journal of Civil Aviation University of China, 2021, 39(4): 8-12.

参考文献 12

[1]	BIRCH D, LEE T, MOKHTARIAN F, et al. Structure and induced dragof a tip vortex[J]. Journal of Aircraft, 2004, 41(5): 1138-1145.
[2]	DEVENPORT W J, RIFE M C, LIAPIS S I, et al. The structure and development of a wing-tip vortex[J]. Journal of Fluid Mechanics, 1996,312: 67-106.
[3]	ANDERSON J D. Introduction to flight[M]. 5th ed. NewYork: McGrawHill, 2007: 31-33.
[4]	马汉东, 崔尔杰. 大型飞机阻力预示与减阻研究[J]. 力学与实践,2007, 29(2): 1-8.
[5]	谭昕. 波音 777X 的变革和启示[J]. 大飞机, 2018(1): 32-35.
[6]	江永泉. 飞机翼梢小翼设计[M]. 北京: 航空工业出版社, 2009: 19-20.
[7]	张庆峰, 熊克, 李伟, 等. 变体翼梢小翼的减阻机理数值模拟[J].航空动力学报, 2014, 29(5): 1105-1111.
[8]	COOPER J E, CHEKKAL I, CHEUNG R C M, et al. Design of a morphing wingtip[J]. Journal of Aircraft, 2015, 52(5): 1394-1403.
[9]	MENTER F R. Two-equation eddy-viscosity turbulence models for engineering applications[J]. AIAA Journal, 1994, 32(8): 1598-1605.
[10]	周宇, 钱炜祺, 邓有奇, 等. k-ω SST 两方程湍流模型中参数影响的初步分析[J]. 空气动力学学报, 2010, 28(2): 213-217.
[11]	CHURCHFIELD M J, BLAISDELL G A. Numerical simulations of awingtip vortex in the near field[J]. Journal of Aircraft, 2009, 46(1):230-243.
[12]	NING S A, KROO I. Multidisciplinary considerations in the design ofwings and wing tip devices[J]. Journal of Aircraft, 2010, 47(2): 534-543.