RF terminal design and implementation for self-adaptive ADS-B anti-interference receiver

Journal of Civil Aviation University of China ›› 2020, Vol. 38 ›› Issue (3): 1-7.

• Civil Aviation • Next Articles

RF terminal design and implementation for self-adaptive ADS-B anti-interference receiver

HU Tieqiao, LIU Liang

（Intelligent Signal and Image Processing Key Lab of Tianjin, CAUC, Tianjin 300300, China）

Received:2019-04-08 Revised:2019-05-04 Online:2020-06-26 Published:2020-06-22

Abstract

Abstract: Aiming at the special requirements of self-adaptive ADS-B anti-interference receiver, RF terminal with good channel consistency is designed involving design scheme, key component design and performance testing. Test results show that the current RF terminal has higher gain, lower noise ratio and better channel consistency,meeting the special requirements of self-adaptive ADS-B anti-interference receiver, and supplying reference for the independent research and development of which.

Key words: ADS-B receiver, interference suppression, RF terminal, channel consistency

CLC Number:

HU Tieqiao, LIU Liang. RF terminal design and implementation for self-adaptive ADS-B anti-interference receiver[J]. Journal of Civil Aviation University of China, 2020, 38(3): 1-7.

References 10

[1]	ABDULAZIZ A, YARO A S, ADAM A A, et al. Optimum receiver for decoding automatic dependent surveillance broadcast（ADS-B）signals[J]. American Journal of Signal Processing, 2015, 5(2): 23-31.
[2]	RTCA. Minimum operational performance standards for 1 090 MHz extended squitter automatic dependent surveillance-bbroadcast (ADSB)and traffic information services-broadcast(TIS-B): DO-260B[S].Washington DC: RTCA. 2009.
[3]	韩吉南. 1090ES 与UAT 模式下ADS-B 数字收发机的设计与实现[D]. 哈尔滨: 哈尔滨工程大学, 2014.
[4]	HAN JINAN, ZHANG CHAOZHU. Design and implementation of a novel high-sensitivity double mode ADS-B digital receiver[C]//12th IEEE International Conference on Electronic Measurement & Instruments（ICEMI）, Qingdao, Shandong, July 16-18, 2015: 835-840.
[5]	任鹏飞. 1090ES 模式下的ADS-B 信号接收机的设计[D]. 哈尔滨:哈尔滨工程大学, 2014.
[6]	MANGALI N K, BAGMARE V S. Development of a Power over Etherne（t PoE）enabled ADS-B receiver system[C]//2017 International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET), Chennai, India, 2017: 1888-1891.
[7]	汪宇, 查明, 李纵, 等. 巴特沃思型低通滤波器的归一化设计[J]. 舰船电子工程, 2018, 38(1): 61-64.
[8]	李宏军, 张强. 脉冲调制系统滤波器设计及应用[J]. 无线电工程,2003(9): 56-57.
[9]	唐宗魁. 噪声系数的测量方法[J]. 科技信息(科学教研), 2008(19):354-355.
[10]	周增建, 王海, 郑胜峰, 等. 一种基于希尔伯特变换的相位差测量方法[J]. 电子质量, 2009(9): 18-19, 22.

RF terminal design and implementation for self-adaptive ADS-B anti-interference receiver

Knowledge

Abstract

Cite this article

share this article

References 10

Related Articles 3

Recommended Articles

Metrics

Comments

[1]	WANG Wenyi,ZHANG Pengfei,HU Tieqiao,ZHONG Lunlong,SHI Qingyan. Design and implementation of blind adaptive interference suppression VHF receiver based on FPGA+DSP [J]. , 2016, 34(1): 10-14.
[2]	HU Tie-qiao,WU Yong,WU Ren-biao,SHI Qing-yan,WANG Xin-peng. Design and implementation of bi-channel constant modulus anti-interference VHF receiver [J]. , 2015, 33(1): 13-18.
[3]	WU Ren-biao,WANG Xin-peng,HU Tie-qiao,SHI Qing-yan,WANG Wan-wei. Design and implementation of single-channel constant modulus anti-interference civil aviation VHF receiver [J]. , 2014, 32(2): 1-5.