姓名：邬栋权
职称：副教授
所在学院（系别）：中欧航空工程师学院
行政职务：无
导师类型：机械（航空工程）—硕导
电子信箱：dqwu@cauc.edu.cn
受教育经历：
2014年09月-2019年07月，天津大学，材料加工工程专业，博士（直博），导师：荆洪阳
2010年09月-2014年07月，天津大学，材料成型及控制工程专业，学士
工作与研究经历：
2022年1月-至今，中欧航空工程师学院，副教授；
2020年11月-2021年12月，中欧航空工程师学院，讲师；
2019年9月-2020年9月，新加坡国立大学，博士后研究员；
研究方向：
[1] 结构完整性评估，蠕变、疲劳，寿命评估
[2] 轻量化结构设计，蜂窝结构，超材料，点阵结构
[3] 机器学习，结构设计优化，数据驱动寿命预测
科研项目：
[1] 国家自然科学基金青年项目：增材制造新型板格超材料高温疲劳失效机理及寿命预测研究，2025.01-2027.12，30万元，在研，课题负责人。
[2] 天津市自然科学基金多元投入青年项目：增材制造新型板格超材料蠕变-疲劳失效机理及寿命预测研究，2024.10-2026.09，6万元，在研，课题负责人。
[3] 中央高校基本科研经费项目：基于蠕变孔洞长大理论的蠕变损伤本构模型及蠕变寿命预测研究，2024.01-2026.01，8万元，在研，课题负责人。
[4] 天津市教委科研计划项目：考虑拘束效应的含裂纹高温结构的蠕变-疲劳损伤及寿命评估研究，2021.07-2023.06，8万元，结题，课题负责人。
[5] 中央高校基本科研经费项目：考虑残余应力影响的含裂纹高温结构蠕变-疲劳交互损伤及寿命评估研究，2022.01-2023.12，8万元，结题，课题负责人。
[6] 天津大学优博基金项目：考虑残余应力和拘束效应影响的含裂纹高温结构蠕变裂纹孕育期预测研究，2018.01-2019.05，6万元，结题，课题负责人。
[7] 国家自然科学基金面上项目：含体积缺陷的高温焊接管道寿命评估理论与方法研究，2015.01-2018.12，84万元，结题，第二参与人。
所获奖励：
[1] 2020年中国民航大学蓝天青年学者
[2] 2023年优秀本科毕业设计指导教师
学术兼职：
《INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES》、《European Journal of Mechanics -A/Solids》、《THEORETICAL AND APPLIED FRACTURE MECHANICS》等期刊审稿人
代表性论文：
[1] Wu Dongquan, et al. Research on the design and mechanical performance of additively manufactured diamond plate lattice metamaterials. Polymer Composites, DOI: 10.1002/pc.29819. (SCI二区)
[2] Wu Dongquan, et al. Experimental and numerical analysis of in-plane compression properties for hierarchical reentrant honeycomb structures. Mechanics of Advanced Materials and Structures, DOI:10.1080/15376494.2024.2442501. (SCI二区)
[3] Li Dinghe, Li Yupeng, Wu Dongquan*, et al. Investigation on compression properties of perforated face-centered-cubic plate-lattice structures. Mechanics of Advanced Materials and Structures, DOI:10.1080/15376494.2024.2447055. (SCI二区)
[4] Wu Dongquan, et al. Investigation of out-of-plane compression mechanical property for novel hierarchical reentrant honeycomb structures. JOURNAL OF THEORETICAL AND APPLIED MECHANICS 63(1), 3-15. (SCI四区)
[5] Wu Dongquan, et al. Investigation of out-of-plane compression mechanical property for novel hierarchical reentrant honeycomb structures. JOURNAL OF THEORETICAL AND APPLIED MECHANICS 63(1), 3-15. (SCI四区)
[6] Wu Dongquan, et al. Numerical and theoretical studies about in-plane impact properties of Semi-Reentrant structures. Meccanica. 2022, 57, 313-336. (SCI三区)
[7] Wu Dongquan, et al. Theoretical and numerical analysis of the creep crack initiation time considering the constraint effects for pressurized pipelines with axial surface cracks. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES 141, 262-275. (SCI一区)
[8] Wu Dongquan*, et al. Investigation of the Creep Crack Initiation times and the Constraint Effects for Pressurized Pipes with Long Surface Cracks. Thin Walled Structure 2020, 153. (SCI二区)
[9] Wu Dongquan, et al. Numerical analysis of the creep crack constraint effects and the creep crack initiation for pressurized pipelines with circumferential surface cracks. ADVANCES IN ENGINEERING SOFTWARE 2018, 115, 40-51. (SCI二区)
[10] Wu Dongquan, et al. Analytical approaches of creep crack initiation prediction coupled with the residual stress and constraint effect. European Journal of Mechanics - A/Solids 2018, 71, 1-15. (SCI二区)
[11] Wu Dongquan, et al. Enhanced models of creep crack initiation prediction coupled the stress-regime creep properties and constraint effect. European Journal of Mechanics -A/Solids 2019, 74, 145-159. (SCI二区)
[12] Wu Dongquan *, et al. Engineering application of enhanced C*-Q* two parameter approaches for predicting creep crack initiation times. European Journal of Mechanics -A/Solids 2020, 82. (SCI二区)
[13] Wu Dongquan, et al. Investigation on creep crack initiation prediction considering constraint effect using constraint parameter Q. THEORETICAL AND APPLIED FRACTURE MECHANICS 2018, 96, 631-641. (SCI二区)
[14] Wu Dongquan, et al. Theoretical and numerical analysis of creep crack initiation combined with primary and secondary stresses. THEORETICAL AND APPLIED FRACTURE MECHANICS 95, 143-154. (SCI二区)
[15] Wu Dongquan, et al. Two-parameter approach of creep crack initiation times considering the constraint effect induced by specimen geometry. THEORETICAL AND APPLIED FRACTURE MECHANICS 2018, 96, 31-44. (SCI二区)
[16] Wu Dongquan, et al. Creep crack initiation prediction considering constraint effect for pressurized pipelines with circumferential surface cracks. Fatigue & Fracture of Engineering Materials and Structures 2018, 41(9), 1900-1917. (SCI二区)
[17] Wu Dongquan, et al. Prediction models of creep crack initiation for different specimen geometry. Mechanics of Advanced Materials and Structures. 2020, 27(19): 1639-1652. (SCI二区)
[18] Wu Dongquan, et al. Equivalent theories and tension properties of semi-reentrant structures. Meccanica. 2021, 56, 2053-2082. (SCI三区)
[19] Wu Dongquan, et al. Study on the stress intensity factor of a compact specimen under the pre-compressed load condition. Journal of Theoretical and Applied Mechanics 2023;61(1):37–47. (SCI四区)
[20] Wu Dongquan, et al. Numerical study on compression properties of semi-reentrant filled tubular structures. Journal of Theoretical and Applied Mechanics 2023;61(2):233–244.(IF: 2.538). (SCI四区)
代表性专利：
[1]邬栋权，袁卓，等，一种新型三维雪花板状负泊松比结构。专利号：202510344803.7
[2]邬栋权，宁赟博，等，可伸缩折叠三维纺锤形蜂窝结构及其剪纸加工工艺。专利号：202211165788.2
[3] 徐连勇，邬栋权，荆洪阳，等，弹性瞬态蠕变条件下含残余应力的蠕变孕育期预测方法。专利号：201710271743.6
[4] 徐连勇，邬栋权，荆洪阳，等，塑性瞬态蠕变条件下考虑拘束效应的蠕变孕育期预测方法。专利号: 201710270920.9.
[5] 徐连勇，邬栋权，荆洪阳，等，高温管道中含椭圆形轴向外表面裂纹的孕育期预测方法。专利号：201710567104.4.
